Access Spine Interface Policy Group
Location in GUI: Fabric
» Access Policies
» Interfaces
» Spine Interfaces
» Policy Groups
Diagram
Section titled “Diagram”Classes
Section titled “Classes”access_policies (apic)
Section titled “access_policies (apic)”Name | Type | Constraint | Mandatory | Default Value |
---|---|---|---|---|
spine_interface_policy_groups | List | [spine_interface_policy_groups] | No |
spine_interface_policy_groups (apic.access_policies)
Section titled “spine_interface_policy_groups (apic.access_policies)”Name | Type | Constraint | Mandatory | Default Value |
---|---|---|---|---|
name | String | Regex: ^[a-zA-Z0-9_.:-]{1,64}$ | Yes | |
link_level_policy | String | Regex: ^[a-zA-Z0-9_.:-]{1,64}$ | No | |
cdp_policy | String | Regex: ^[a-zA-Z0-9_.:-]{1,64}$ | No | |
aaep | String | Regex: ^[a-zA-Z0-9_.:-]{1,64}$ | No | |
macsec_interface_policy | String | Regex: ^[a-zA-Z0-9_.:-]{1,64}$ | No |
Examples
Section titled “Examples”Example-1: This configuration defines a spine interface policy group named IPN1
, it sets the interface speed to 10G
, enables CDP, and associates the group with the AAEP profile AAEP1
for consistent policy application on spine switch interfaces.
apic: access_policies: spine_interface_policy_groups: - name: IPN1 link_level_policy: 10G cdp_policy: CDP-ENABLED aaep: AAEP1
Example-2: This configuration defines two Access Spine Interface Policy Groups. This group allows you to associate interface-level policies such as link level, CDP, LLDP, and attachable access entity profiles AAEP to spine interfaces.
The first group, named IPN1
, assigns the following policies to spine interfaces:
- link_level_policy:
10G
: Sets the interface speed to 10 Gigabit. - cdp_policy:
CDP-ENABLED
: Enables Cisco Discovery Protocol on the interface. - aaep:
AAEP1
: Associates the interface with the Attachable Access Entity Profile named AAEP1. - lldp_policy:
LLDP-ENABLED
: Enables Link Layer Discovery Protocol. - description: Provides a human-readable description for the group.
The second group, SPINE-INT-GRP-01
, is similar but uses a 25G
link level policy, disables CDP, and uses a different AAEP.
These groups standardize interface settings for spine switches, making it easier to apply consistent policies across multiple interfaces.
apic: access_policies: spine_interface_policy_groups: - name: IPN1 link_level_policy: "10G" cdp_policy: "CDP-ENABLED" aaep: "AAEP1" lldp_policy: "LLDP-ENABLED" description: "Spine interface group for IPN connectivity"
- name: SPINE-INT-GRP-01 link_level_policy: "25G" cdp_policy: "CDP-DISABLED" aaep: "AAEP-SPINE" lldp_policy: "LLDP-ENABLED" description: "Standard 25G spine interface group"