CLI Feature Template

Configure devices using CLI Add-On Templates. This feature template used to attach specific CLI configurations to a device.

Diagram

Classes

edge_feature_templates (sdwan)

Name	Type	Constraint	Mandatory	Default Value
cli_templates	List	`[cli_templates]`	No

cli_templates (sdwan.edge_feature_templates)

Name	Type	Constraint	Mandatory
name	String	Regex: `^[^<>!&" ]{1,128}$`	Yes
description	String		Yes
device_types	List	Choice[`ASR-1001-HX`, `ASR-1001-X`, `ASR-1002-HX`, `ASR-1002-X`, `ASR-1006-X`, `C1101-4P`, `C1101-4PLTEP`, `C1101-4PLTEPW`, `C1109-2PLTEGB`, `C1109-2PLTEUS`, `C1109-2PLTEVZ`, `C1109-4PLTE2P`, `C1109-4PLTE2PW`, `C1111-4P`, `C1111-4PLTEEA`, `C1111-4PLTELA`, `C1111-4PW`, `C1111-8P`, `C1111-8PLTEEA`, `C1111-8PLTEEAW`, `C1111-8PLTELA`, `C1111-8PLTELAW`, `C1111-8PW`, `C1111X-8P`, `C1112-8P`, `C1112-8PLTEEA`, `C1112-8PLTEEAWE`, `C1112-8PWE`, `C1113-8P`, `C1113-8PLTEEA`, `C1113-8PLTEEAW`, `C1113-8PLTELA`, `C1113-8PLTELAWZ`, `C1113-8PLTEW`, `C1113-8PM`, `C1113-8PMLTEEA`, `C1113-8PMWE`, `C1113-8PW`, `C1116-4P`, `C1116-4PLTEEA`, `C1116-4PLTEEAWE`, `C1116-4PWE`, `C1117-4P`, `C1117-4PLTEEA`, `C1117-4PLTEEAW`, `C1117-4PLTELA`, `C1117-4PLTELAWZ`, `C1117-4PM`, `C1117-4PMLTEEA`, `C1117-4PMLTEEAWE`, `C1117-4PMWE`, `C1117-4PW`, `C1118-8P`, `C1121-4P`, `C1121-4PLTEP`, `C1121-8P`, `C1121-8PLTEP`, `C1121-8PLTEPW`, `C1121X-8P`, `C1121X-8PLTEP`, `C1121X-8PLTEPW`, `C1126-8PLTEP`, `C1126X-8PLTEP`, `C1127-8PLTEP`, `C1127-8PMLTEP`, `C1127X-8PLTEP`, `C1127X-8PMLTEP`, `C1128-8PLTEP`, `C1131-8PLTEPW`, `C1131-8PW`, `C1131X-8PLTEPW`, `C1131X-8PW`, `C1161-8P`, `C1161-8PLTEP`, `C1161X-8P`, `C1161X-8PLTEP`, `C8000V`, `C8200-1N-4T`, `C8200L-1N-4T`, `C8300-1N1S-4T2X`, `C8300-1N1S-6T`, `C8300-2N2S-4T2X`, `C8300-2N2S-6T`, `C8500-12X`, `C8500-12X4QC`, `C8500-20X6C`, `C8500L-8S4X`, `IR-1101`, `IR-1821`, `IR-1831`, `IR-1833`, `IR-1835`, `IR-8140H`, `IR-8140H-P`, `IR-8340`, `ISR-4221`, `ISR-4221X`, `ISR-4321`, `ISR-4331`, `ISR-4351`, `ISR-4431`, `ISR-4451-X`, `ISR-4461`, `ISR1100-4G-XE`, `ISR1100-4GLTEGB-XE`, `ISR1100-4GLTENA-XE`, `ISR1100-6G-XE`, `ISR1100X-4G-XE`, `ISR1100X-6G-XE`]	No
cli_config	String		Yes

Examples

Example-1: This example shows how with CLI Add-On to add BFD configuration to be used by BGP protocol for rapid failure detection: first defining BFD template with interval and multiplier parameters, which then is attached to the BGP neighbor, and also enable new BGP community format.

sdwan:
  cedge_feature_templates:
    cli-template:
      - name: FT-CEDGE-CLI-01
        description: "cEdge CLI template"
        parameters:
          config: |
          ip bgp-community new-format
          bfd-template single-hop test
           interval min-tx 400 min-rx 400 multiplier 5
          interface GigabitEthernet3
            bfd template test
          router bgp {{vpn10_bgp_as_number_cli}}
          address-family ipv4 vrf 10
           neighbor {{vpn10_bgp_ipv4_neighbor1_address_cli}} soft-reconfiguration inbound
           neighbor {{vpn10_bgp_ipv4_neighbor1_address_cli}} fall-over bfd